LESS COOLING?

Reason: Blockage in pads & water distribution system  due to dirty / Salty & muddy water hard particals accumulation
Explanation: Wash out the mud, salt & any other foreign particals from pads & Water distribution system with forced water.
Solution: If the cooling still does not improve, change the cooling pads
Reason: Presence of some foreign & unwanted material
Explanation: Water,wood wool pad residue, hair, hard salt ,insects, etc. could be stuck in the pump
Solution: Remove the foreign material with the help of sand paper
Reason: High humidity
Explanation: Humid weather can affect the efficiency of the air cooler, residential coolers  like in coastal area.
Solution: Install the air cooler near the window and open all the windows to enable fresh air circulation
Reason: Lack of ventilation
Explanation: When the air cooler is installed in a room without ventilation, it affects the performance & increase humidity.
Solution: Install the air cooler near the window and open all the windows to enable fresh air circulation

FAN NOT WORKING?

Reason: There are chances that you have set the control knob at wrong position .
Explanation: If the Control knob is not set at the speed mode then fan will not work
Solution: Set the control knob at the speed mode & at desired speed.
Reason: Power disconnect / loose connection
Explanation: If the power supply / loose connections not proper , the fan will stop working
Solution: Check the main power socket

WATER DROPLETS SPLASHING OUT OF THE BLOWER / FAN ALONG WITH AIR FLOW?

Reason: Wood wool Sagging / Wood wool flakes comes out from mesh from its position.
Explanation: When the wood wool threads come out of the mesh, water droplets present in them spray out along with the air flow , when wood wool sagging ,fan suck water directly and throw with air.
Solution: Reset every thread of wood wool within the mesh to avoid the water droplets from spraying & arrange wood wool properly

PERIODIC MAINTENANCE TO INCREASE PRODUCT LIFE ?

Periodic maintenance can increase the overall life of an Air Cooler. To keep your Air Cooler product in good condition, please check the following:

  • with  Regular interval oiling for Main Motor.
  • Cleaning of water tank regularly to remove mud, salt & scaling due to foreign material.
  • Check with regular interval for loose connection.
  • Clean impeller & shaft of Pump Motor in regular interval to avoid pump jamming due to scaling & low cooling.
  • Clean Water distribution system to remove blockages due to dirty water & get required water for cooling media.
  • Clean all internal & external parts with soft, clean cloth. Don’t use hazardouc chemical, detergant for cleaning.

CHANGE WOOD WOOL PADS ONCE IN A YEAR TO GET ?

A)To get effective cooling & specified air throw..
B)To avoid bad smell due to blocking of wood wool.
C)To avoid breed of germs, bacteria due to blocking of wood wool.
D)Blockage of woodwool increase load on Main motor, resulted in more power consumption & life of motor.
E)Sagging of wood wool , throws water with air.
F) Changing Cooling Pads yearly , you will get best optimum air / cooling performance.
By changing cooling pads & doing periodic maintenance you will get best results from your air cooler.Contact authorised service provider for the same.